Flagship Marine
CALL TOLL FREE
1-800-316-6426
Roof Top Units
SeaMach Free Shipping
 Flagship Marine is a Worldwide Distributor for the SeaMach and other fine RVP Coleman® - Mach® products.
SeaMach International Marine Rooftop A/C -13,500 BTUs of cooling with heat, ceiling assembly, controls and installation kit. Includes Shippng.

Attractive interior ceiling assembly distributes air fore and aft
Water seal rubber compression gasket
Hi Cool - Low Cool - Heat - Off and thermostat control switches
Safe and reliable electric heating element
Complete installation hardware kit
Detailed and easy to follow installation manual
$899.95
Includes roof top unit, ceiling assembly and heat kit.
+$180 shipping to lower 48 US



Factory Direct Pricing to OEMs, Commercial Operators, the Military & Individual Consumers
   Turn your boat's cabin into a cool refuge from the heat of the day with a SeaMach Marine Air Conditioner - manufactured by the legendary industry leader - RVP - Coleman® Mach®.
   Built with extra protection against the vibration and saltwater corrosion that come with the territory on a boat, the SeaMach is an investment in quality you can rely on, season after season.
   SeaMach features a powerful 13,500 BTU cooling capacity, a quiet, high efficiency rotary compressor with a very low start up surge, and it can be equipped with an Elect-A-Heat option that will take the chill off your cabin on cooler outings.
   Manufactured by the long time industry leader for recreational vehicles and off-road RV applications, SeaMach is tough enough to give you years of cool comfort below deck.
Here's what makes SeaMach a sea-worthy performer - unique and highly superior to a standard rooftop unit:
The blower motor features a stainless steel shaft and plastic fan blade rather than steel, and is totally enclosed in an epoxy   coated housing.
Plastic drain pan rather than steel.
Baked enamel coated condensers that protect the aluminum fins from deterioration rather than naked aluminum condenser   fins.
Flexible refrigeration hoses provide better shock protection rather than pipe with soldered joints that can break under stress.
The compressor is supported to withstand the impact forces a moving vessel will encounter.
All exposed sheet metal parts are electrostatically powder coated rather than baked enamel.
Hard start capacitor makes starting much easier on your vessel's power supply and generator.
Simple to install with common hand tools - one 14" square opening - one power supply wire!
MagnaGard screws are chemically treated to resist corrosion.
Dow Corning protective agent seals all exposed metal parts.
Raised-lance fins on the coils increase the surface area available for heat transfer, enhancing the efficiency of the cooling   process.
Quiet, easy to start, rugged and efficient rotary compressor.
New and improved hail and UV resistant polyethylene exterior shroud

Specifications

Dimensions - Exterior shroud - 43" L x 29" W x 13.25" H,
Dimensions - Interior shroud - 26" L x 22.5" W x 3" H
Weight - 107.5 lbs with interior shroud
Shipping dimensions - 1 pallet - 45" x 31" x 20" H
Shipping weight - 140 lbs
Ceiling cut out - 14" x 14"
Maximum allowable offset from level, front to back and side to side - 15°
Refrigerant type - R407C (zero ozone depleting)
Refrigerant charge - 8373 - 12.75oz., model 8473 (heavy duty) - 15.0 oz.
Metering device - Capillary tube
Evaporator air delivery - 320 CFM - 543.7 CMH
Capacity (Nominal BTUH) - Cooling = 13,500 BTU, Heating 5,600 BTU
Electrical rating - 240 VAC @ 50HZ, single phase. This unit is rated @50HZ, however we have many years experience running them on 60HZ without any problems, however it is not sanctioned by the manufacturer.
App. current - Cooling 1,687 (7Amp) min -2,117 (9Amp) max, Heating 1,800 (7.5Amp)
Compressor locked rotor amps - 32.0

New from Coleman Mach: the Chill Grille - a heat ready ceiling assembly featuring adjustable louvers designed to direct conditioned air downwards into the cabin in any direction. When the louvers are closed, conditioned air is directed forward and aft through the front and rear air flow dampers.
Operation and control knobs are positioned on the horizontal surface for easy access and the pop-out retainer grille makes for easy, tool-free access to the washable air filters. The sleek styling provides a contemporary look and feel. When replacing an earlier ceiling assembly the Chill Grille is designed to cover the existing imprints.

Chill Grille


 
Questions? Our Customer Service & Tech Support Team is Here to Help
800-316-6426 | sales@flagshipmarine.com

Flagship Marine, Inc., 2427 SE Dixie Hwy., Stuart, Florida 34996 - USA
Phone: 772-283-1609 Fax: 772-283-4611 Wats: 800-316-6426 sales@flagshipmarine.com

Copyright © 1995- Flagship Marine, Inc. All Rights Reserved